1.2MW光伏+1.2MW储能DCDC系统 | 12×200kW·母线750-900V·光伏200-700V·电池1000-1500V·98%高效 | 1.2MW PV + 1.2MW Storage DC-DC System | 12×200kW · Bus 750-900V · PV 200-700V · Battery 1000-1500V · 98% Efficiency
|
出品方：稳利达电力电子 | Wenlida Power Electronics |
项目简介 | Project Introduction
本项目为1.2MW光伏+1.2MW储能DCDC系统，由稳利达电力电子提供整套光储直流母线变换一体化解决方案。系统由6台200kW光伏MPPT DCDC（光伏侧200-700Vdc、母线侧750-900Vdc，单台光伏侧电流≤350A）与6台200kW储能双向DCDC（电池侧1000-1500Vdc、母线侧750-900Vdc，单台电池侧电流≤200A）构成，共2台整柜（每台800×800×2100mm）。直流母线接口额定1200kW/1600A（750-900Vdc），光伏接口1-6与电池接口1-6各单路200kW。光伏DCDC转换效率98%（高压750V/低压600V），储能DCDC效率98%（高压1500V/低压900V），支持MPPT或恒压/恒流/恒功率模式，静态稳定度±1%、动态±3%。配置触摸屏（支持远程监视）、RS485（Modbus RTU）与以太网（Modbus TCP）双通道通讯，强制风冷、IP20防护，适用于大型光储一体、新能源电站直流母线汇聚、光储充及高压直流微电网等场景。
This project is a 1.2MW PV + 1.2MW storage DC-DC system, delivered by Wenlida Power Electronics as a complete PV-storage DC-bus conversion solution. The system consists of six 200kW PV MPPT DC-DC modules (PV side 200-700Vdc, bus side 750-900Vdc; ≤350A PV-side current each) and six 200kW storage bidirectional DC-DC modules (battery side 1000-1500Vdc, bus side 750-900Vdc; ≤200A battery-side current each), housed in 2 cabinets (each 800×800×2100mm). The DC bus port is rated 1200kW/1600A (750-900Vdc), with PV ports 1-6 and battery ports 1-6 each 200kW per channel. PV DC-DC efficiency is 98% (HV 750V/LV 600V) and storage DC-DC efficiency 98% (HV 1500V/LV 900V), supporting MPPT or CV/CC/CP modes, with static stability ±1% and dynamic ±3%. It features a touch screen (with remote monitoring), dual-channel RS485 (Modbus RTU) and Ethernet (Modbus TCP) communication, forced air cooling and IP20 protection. It suits large PV-storage integration, DC-bus collection for renewable plants, PV-storage-charging and high-voltage DC micro-grids.
系统拓扑说明 | System Topology Description
|
图1：系统拓扑图 | Figure 1: System Topology Diagram |
|
图2：1.2MW光伏+1.2MW储能DCDC系统应用场景（见下方配图）| Figure 2: 1.2MW PV + 1.2MW storage DC-DC system application scenario (see image below) |
图2：1.2MW光伏+1.2MW储能DCDC系统应用场景 | Figure 2: 1.2MW PV + 1.2MW storage DC-DC system application scenario
整套系统提供10寸本地触摸屏，供客户监控数据和触摸操作；提供一路RS485接口支持遥控、遥测、遥调功能。6路光伏阵列经MPPT变换、6路电池经双向变换，共同汇入750-900V直流母线，实现光伏发电与储能充放电的直流侧灵活调度。所有电缆和信号线均采用底部下进线、下出线。
The system provides a 10-inch local touch screen for on-site monitoring and touch operation, and one RS485 port for remote telecontrol, telemetry and tele-adjustment. Six PV strings are converted via MPPT and six battery ports via bidirectional conversion, all collected onto the 750-900V DC bus, realizing flexible DC-side dispatch between PV generation and storage charge/discharge. All power and signal cables enter and exit from the bottom.
完整全套参数表 | Complete Parameter Tables
表1 200kW光伏DCDC模块电气参数 | Table 1 200kW PV DC-DC Module (1-6) Parameters
|
序号 No. |
电气类目 Category |
详细类目 Item |
规格 Specification |
|
1 |
直流电压 DC Voltage |
光伏侧 / 母线侧 PV / Bus |
200-700Vdc / 750-900Vdc |
|
2 |
直流电流 DC Current |
光伏侧 / 母线侧 PV / Bus |
≤350A / ≤267A |
|
3 |
转换效率 Efficiency |
HV 750V / LV 600V |
98% (lab conditions) |
|
4 |
额定功率 Rated Power |
|
200kW @ LV 571V |
|
5 |
工作模式 Operation Mode |
|
MPPT (configurable) |
|
6 |
电压稳定度 Voltage Stability |
静态 / 动态 Static / Dynamic |
±1% / ±3% |
|
7 |
电流稳定度 Current Stability |
静态 / 动态 Static / Dynamic |
±1% / ±3% |
|
8 |
通信接口 Communication |
|
RS485 isolated (Modbus RTU); CAN2.0A/B isolated (up to 1M/s) |
|
9 |
保护 Protection |
|
HV/LV over-/under-voltage, over-current, over-temperature, communication; auto-recovery |
|
10 |
尺寸 / 重量 Dimension / Weight |
W×D×L |
543 × 600 × 154 mm / 55kg |
|
11 |
散热方式 Cooling |
|
Air cooling |
表2 200kW储能DCDC模块电气参数 | Table 2 200kW Storage DC-DC Module (7-12) Parameters
|
序号 No. |
电气类目 Category |
详细类目 Item |
规格 Specification |
|
1 |
直流电压 DC Voltage |
电池侧 / 母线侧 Battery / Bus |
1000-1500Vdc / 750-900Vdc |
|
2 |
直流电流 DC Current |
电池侧 / 母线侧 Battery / Bus |
≤200A / ≤200A |
|
3 |
转换效率 Efficiency |
HV 1500V / LV 900V |
98% (lab conditions) |
|
4 |
额定功率 Rated Power |
|
200kW @ LV 1000V |
|
5 |
工作模式 Operation Mode |
|
CV / CC / CP (configurable) |
|
6 |
电压稳定度 Voltage Stability |
静态 / 动态 Static / Dynamic |
±1% / ±3% |
|
7 |
电流稳定度 Current Stability |
静态 / 动态 Static / Dynamic |
±1% / ±3% |
|
8 |
通信接口 Communication |
|
RS485 isolated (Modbus RTU); CAN2.0A/B isolated (up to 1M/s) |
|
9 |
保护 Protection |
|
HV/LV over-/under-voltage, over-current, over-temperature, communication; auto-recovery |
|
10 |
尺寸 / 重量 Dimension / Weight |
W×D×L |
543 × 600 × 154 mm / 60kg |
|
11 |
散热方式 Cooling |
|
Air cooling |
表3 整机规格参数 | Table 3 Complete Unit Specifications
|
端口 Port |
项目 Item |
参数 Parameter |
|
直流母线接口 |
电压范围 Voltage Range (Vdc) |
750-900 |
|
**大电流 Max. Current (A) |
1600 |
|
|
额定功率 Rated Power (kW) |
1200 |
|
|
光伏接口 1-6 |
电压范围 Voltage Range (Vdc) |
200-700 |
|
**大电流 Max. Current (A) |
350 |
|
|
额定功率 Rated Power (kW) |
200 (per channel) |
|
|
电池接口 1-6 |
电压范围 Voltage Range (Vdc) |
1000-1500 |
|
**大电流 Max. Current (A) |
200 |
|
|
额定功率 Rated Power (kW) |
200 (per channel) |
|
|
整机基本参数 |
工作温度范围 Operating Temp. (℃) |
-30 ~ +60 (derate above 45℃) |
|
相对湿度 Relative Humidity |
0 ~ 90%, non-condensing |
|
|
**工作海拔 Max. Altitude (m) |
4000 (derate above 2000m) |
|
|
冷却方式 Cooling |
Forced air cooling |
|
|
显示 Display |
Touch screen (remote monitoring) |
|
|
通讯方式 Communication |
RS485 (Modbus RTU) / Ethernet (Modbus TCP) |
|
|
辅助供电 Aux. Power |
AC220V ≈3.5kW (User-supplied) |
|
|
防护等级 / 尺寸 Protection / Size |
IP20 / 800 × 800 × 2100 mm × 2台 |
设备搬运说明 | Equipment Handling Instruction
机柜底座开有两个方形孔，搬运时叉车两根货叉通过方形孔叉入机柜底部，移动过程中需保证缓慢、平稳，避免设备磕碰倾倒。
Two square holes are reserved at the cabinet base. Insert two forklift forks through the square holes to the cabinet bottom during handling. Move slowly and steadily to prevent collision or tipping-over.
应用场景 | Application Scenarios
典型应用 | Typical Applications
? 大型光储一体、光伏+储能直流母线汇聚
? 新能源电站高压直流微电网
? 光储充一体站光伏MPPT与储能双向变换
? 工商业园区绿色低碳光储供电
? 高压直流配电与直流负载供电
? Large PV-storage integration and PV + storage DC-bus collection
? High-voltage DC micro-grids for renewable plants
? PV MPPT and storage bidirectional conversion for PV-storage-charging stations
? Green low-carbon PV-storage power for C&I parks
? High-voltage DC distribution and DC-load supply
|
定制说明：稳利达电力电子本系列产品支持定制开发，可根据光伏/电池电压等级、母线电压、功率模块数量与柜体数量灵活配置，适配不同规模光储直流应用项目需求。 Customization Note: Customization available by Wenlida Power Electronics. PV/battery voltage class, bus voltage, number of power modules and cabinet quantity can be flexibly configured according to site conditions to meet various PV-storage DC application requirements. |
沪公网安备31011402011875
TONGJI
021-31587108
947074041@qq.com
在线留言
