搜索

DC/DC变流器

60V系列大功率双向DCDC(风冷) 60V系列大功率双向DCDC(水冷) 900V系列大功率双向DCDC(风冷) 900V系列大功率双向DCDC(水冷) 1200V系列大功率双向DCDC(风冷) 1200V系列大功率双向DCDC(水冷) 1600V系列大功率双向DCDC 2000V系列大功率双向双向DCDC 升降压系列大功率双向DCDC SIC系列大功率双向DCDC(风冷) SIC系列大功率双向DCDC(水冷) 定制产品

暂降治理

直流电压支撑系统

直直充电桩

WLD-CP40KS WLD-CP60KS WLD-CP120KD WLD-CPD20KS-V2G WLD-CPD40KS-V2G/ WLD-CPD40KD-V2G WLD-CPD60KS-V2G/ WLD-CPD60KD-V2G WLD-CPD120KS-V2G/ WLD-CPD120KD-V2G WLD-CPA20KS-V2G WLD-CPA40KS-V2G/ WLD-CPA40KD-V2G WLD-CPA60KS-V2G/ WLD-CPA60KD-V2G WLD-CPA120KS-V2G/ WLD-CPA120KD-V2G

DC-UPS

WLD-DC_VSS 直流电压支撑系统(电站直流侧应急电源) WLD-DC_VSS 直流电压支撑系统(数据机房直流侧应急电源)

电梯改造

电池检测

能量标定 电池能量转移系统 电池包测试系统(PACK)

能量路由器

多端口能量路由器 光储充一体机 光储直柔系统 光储充电站集成

PCS&储能

30KW双向储能逆变器 50KW双向储能逆变器 梯次电池集控系统 光储DCDC

工业节能

电梯节能 港口节能 行车节能

服务

客户服务客户见证技术中心常见问题采购合作

联络

公司简介组织结构荣誉资质市场覆盖联系我们交通地图加入我们新闻中心

EN

案例

2200V高压双向DCDC变流器 | 450kW·300A长期·1000-2200V/100-1500V·97%高效·6000m海拔

发布时间:2026-11-11

2200V高压双向DCDC变流器 | 450kW·300A长期·1000-2200V/100-1500V·97%高效·6000m海拔 | 2200V High-Voltage Bidirectional DC-DC Converter | 450kW · 300A Continuous · 1000-2200V/100-1500V · 97% Efficiency · 6000m Altitude

出品方:稳利达电力电子 | Wenlida Power Electronics

产品简介 | Product Introduction

WLD-2.2KV300A450KA20H为高压双向DC/DC变流器,由稳利达电力电子采用全数字化设计,实现电压、电流双环反馈。产品高压端1000-2200Vdc(额定1800V)、低压端100-1500Vdc,两端**大电流500A、**大功率450kW;长期运行电流300A,短时500A可持续60秒,转换效率97%(半载至满载均>97%),电压精度±0.5%FS,静态损耗电流仅20mA(空载)。产品要求高压侧电压必须高于低压侧,实际运行需满足 HV×0.05 < LV < HV×0.95(即高、低压间保留5%压差)。支持恒压/恒流/恒功率、下垂并联(定制版)、输入/输出过压欠压、过流、过温、短路(直流熔断)与防反接保护,启动及电压/电流控制可通过CAN或RS485(Modbus RTU)远程设置。绝缘耐压3000VDC/60s、绝缘阻抗2500VDC≥10MΩ/min,工作温度-20~+55℃(45℃以上降额),海拔**6000米(>3000米每升高100米降额1%),噪声<40dBA,适用于高压直流输电、储能高压侧变换、电解制氢、高压直流测试电源及大功率直流微电网等场景。

WLD-2.2KV300A450KA20H is a high-voltage bidirectional DC-DC converter, delivered by Wenlida Power Electronics with an all-digital design and dual-loop voltage/current feedback. Its HV side is 1000-2200Vdc (rated 1800V) and LV side 100-1500Vdc; both ends handle up to 500A and 450kW. Continuous current is 300A with 500A for 60 seconds, efficiency 97% (>97% from half load to full load), voltage accuracy ±0.5%FS, and quiescent current only 20mA (no-load). The HV side must be higher than the LV side, and operation must satisfy HV×0.05 < LV < HV×0.95 (a 5% differential between HV and LV). It supports CV/CC/CP, droop parallel (customized), input/output over-/under-voltage, over-current, over-temperature, short-circuit (DC fuse) and reverse-polarity protection; start-up and voltage/current control can be remotely configured via CAN or RS485 (Modbus RTU). Withstand voltage 3000VDC/60s, insulation resistance 2500VDC ≥10MΩ/min, operating temperature -20~+55℃ (derate above 45℃), altitude up to 6000m (derate 1% per 100m above 3000m), and noise <40dBA. It suits HVDC transmission, HV-side storage conversion, water electrolysis for hydrogen, high-voltage DC test power and high-power DC micro-grids.

 

图1:2200V高压双向DCDC变流器应用场景 | Figure 2: 2200V high-voltage bidirectional DC-DC converter application scenario

本产品为高压双向DC/DC变流器,采用全数字化设计与电压、电流双环反馈,在高、低压端之间实现双向大功率能量交换。需注意高压侧电压必须高于低压侧,实际运行中高压电压×0.05 < 低压电压 < 高压电压×0.95,即高、低压之间需保留5%压差,否则易引起设备损坏。

This product is a high-voltage bidirectional DC-DC converter with an all-digital design and dual-loop voltage/current feedback, enabling bidirectional high-power energy exchange between the HV and LV sides. Note that the HV voltage must be higher than the LV voltage: HV×0.05 < LV < HV×0.95, i.e. a 5% differential is required between HV and LV, otherwise the equipment may be damaged.

完整参数表 | Complete Parameter Tables

表1 基本参数 | Table 1 Basic Parameters

端口 Port

项目 Item

参数 Parameter

低压端
LV Side

额定电压 Rated Voltage

可设置 Configurable

电压范围 Voltage Range (Vdc)

100 - 1500

**大电流 Max. Current (A)

500

**大功率 Max. Power (kW)

450

高压端
HV Side

额定电压 Rated Voltage

可设置(额定 1800V)

电压范围 Voltage Range (Vdc)

1000 - 2200

**大电流 Max. Current (A)

500

**大功率 Max. Power (kW)

450

通讯 Communication

RS485

1路,Modbus RTU,9600波特率

CAN

2路,兼容CAN2.0A/B,125K/250K/500K/1M波特率可设

表2 高压端电气特性 | Table 2 HV-Side Electrical Characteristics

项目 Item

单位 Unit

**小值 Min

额定值 Rated

备注 Note

电压 Voltage

V DC

1000

1800

精度 ±0.5%FS

效率 Efficiency

%

 

97%

额定输入,>97% @ 半载至满载

**大电流 Max. Current

A

 

500

300A长期,500A@60S

静态损耗电流 Quiescent Loss

A

 

20mA

空载

辅助电源 Aux. Power

W

 

待定 TBD

220VAC 或直流定制

表3 保护功能 | Table 3 Protection Functions

保护项 Protection

说明 Description

高压过压/欠压 HV Over/Under-voltage

保护点/恢复点可设置;输入过压/欠压时关闭输出,到达恢复点后自恢复

防反接 Reverse-Polarity

支持

过流保护 Over-current

保护点可设置;输入限流、输出恒压,退出限流后电压自恢复

过压/欠压保护 Over/Under-voltage (LV)

保护点可设置;关闭输出并上报、存储,正常时自动恢复

输出并联 Parallel

定制版:下垂并联

过温保护 Over-temperature

降至安全温度后自动恢复

短路保护 Short-circuit

直流熔断机制

启动/电压/电流控制 Control

通过 CAN 或 RS485 总线远程使能与设置(协议由我方提供)

表4 环境与安规 | Table 4 Environment & Safety

项目 Item

参数 Parameter

工作温度 Operating Temp.

-20 ~ +55℃(45℃以上需降额使用)

工作湿度 Operating Humidity

5% ~ 95%,无冷凝

存储温度/湿度 Storage

-40 ~ 125℃ / 5 ~ 95%

海拔高度 Altitude

6000米(>3000米需降额,每上升100米降额1%)

绝缘电压 Withstand Voltage

输入-输出 非隔离;输入/输出-机壳 3000VDC 60s ≤10mA 无击穿飞弧

绝缘阻抗 Insulation Resistance

2500VDC ≥10MΩ/min

噪声 Noise

<40dBA @1m(额定工作状态)

压差要求 Voltage Differential

HV×0.05 < LV < HV×0.95(高压必须高于低压)

应用场景 | Application Scenarios

典型应用 | Typical Applications

? 高压直流输电与高压直流微电网

? 储能系统高压侧双向变换

? 电解制氢、绿氢电源

? 高压直流测试电源、电池簇高压变换

? 大功率直流充电与工业高压直流电源

? HVDC transmission and high-voltage DC micro-grids

? HV-side bidirectional conversion for energy storage

? Water electrolysis for hydrogen and green-hydrogen power supply

? High-voltage DC test power and battery-cluster HV conversion

? High-power DC charging and industrial high-voltage DC power

定制说明:稳利达电力电子本系列产品支持定制开发,可根据电压等级、电流、功率、并联方式与通讯协议灵活配置,适配不同高压大功率直流应用需求。

Customization Note: Customization available by Wenlida Power Electronics. Voltage class, current, power, parallel mode and communication protocol can be flexibly configured according to site conditions to meet various high-voltage high-power DC application requirements.



021-31587108
947074041@qq.com
在线留言在线留言
官方微信
官方微信
在线咨询关闭
  留言         投诉         询问         其他
*
*
*
请您留下真实电子邮件或者电话以便我们工作人员及时回复及解答!
*
*